Analisa Pengaruh Variasi Diameter Pipa Tekan PVC Pada Pompa Rotari Untuk Kecepatan Gaya Dorong Air

DOI: https://doi.org/10.21070/r.e.m.v2i1.846

Author (s)


(1) * Rega Yuan Pradhana   (Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(2)  Edi Widodo   (Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(*) Corresponding Author

Abstract


This research is aimed to analyze the effects of the PVC rotary pipe’s diameter to the velocity of the viscous forces. The diameter of the PVC rotary pipe used in this research are (1 ½”, 1”, ¾”, ½” inch). The procedure of this reasearch is begin with designing the pipe’s installation, then continued with the pipe installation, then continued with data recording. After the data is collected from the experiment, analyzing the data is needed. Also, calculate if there’s any effects of the velocity of the viscous forces due to the changing of the dependent variables (which is the diameter of the PVC rotary pipe). In the process of the fluid conduction inside the pipe, head losses are usually happened. The manual calculation needed to complete the research are, surface area calculation, fluid velocity calculation, reynold number calculation and coeff. Losses calculation. After all of the calculation are collected, the result of the research will be obtained. After that, discussion and conclusion can be produced.



Keywords

PVC Diameter Pipe; Rotary Pump; Water Pressure



Full Text: PDF



References


[1] Siregar ,Batara Guru Dewa, Studi Eksperimental Karakteristik Bubble Sebagai Indikasi Awal Terjadinya Fenomena Kavitasi Dengan Menggunakan Sinyal Vibrasi Pada Pompa Sentrifugal.. 2012, Pompa Sentrifugal, Gelembung, Kavitasi, Pipa Isap, hal. 23.

[2] Iskandar , Cepi.Analisa Kerugian Gesekan Pada Pipa Penyalur.. 2006, Pompa Sentrifugal Jenis Demster Dan Perawatan Pompa.

[3] Heri Kustanto, Wiyono Penelitian Kerugian Head Pada Instalasi Pompa Dirangkai Secara Paralel Untuk Fluida Air Dan Air Deterjen.. 2013, hal. 95.

[4] Gujarati, Damodar N.Dasar-dasar Ekonometrika. Jakarta : Salemba Empat, 2012.

[5] Sarwono, Jonathan.12 Jurus Ampuh SPSS untuk Riset Skripsi. Jakarta : Elexmedia Komputindo Kompas Gramedia Jakarta, 2013.

[6] Levin, Richard and David S Rubin.Statistic For Management. 7th Edition : Prentice-all International Inc, 1998.

[7] Bagus Shella A.Kaji eksperimental Rugi Tekan (Head Losses) Dan Faktor Gesekan Yang Terjadi Pada Pipa Lurus Dan Belokan. Semarang : UNDIP, 2010.

[8] Antony, Dachry. Efek Kekerasan Pipa Terhadap Koefisien Gesek.. 2012, hal. 12.

[9] Triatmodjo, Bambang. Pelabuhan. Yogyakarta : Beta Offset, 1996.


Article View

Abstract views : 323 times | PDF files viewed : 732 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/r.e.m.v2i1.846




Copyright (c) 2017 R.E.M. (Rekayasa Energi Manufaktur) Jurnal

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.