Pengaruh Variasi Karbon Aktif dan Waktu Tahan Terhadap Kekerasan Material JIS G-3123 Menggunakan Metode Pack Carburizing

DOI: https://doi.org/10.21070/r.e.m.v2i1.805

Author (s)


(1) * Rahma Rei Sakura   (Institut Teknologi Adhi Tama Surabaya)  
        Indonesia
(2)  Suheni Suheni   (Institut Teknologi Adhi Tama Surabaya)  
        Indonesia
(3)  Dani Darojat Iskandar   (Institut Teknologi Adhi Tama Surabaya)  
        Indonesia
(*) Corresponding Author

Abstract


Improvement of mechanical feature in metals are necessary for industrial development. In industries, it requires the mechanical features, such as frictional strength and good wear resistance. Carburizing is a heat treatment process that produces toughness surface in the presence of carbon-bearing material. The carburizing process of JIS G-3123 steel was performed by Pack Carburizing method with divergent variation of activated carbon weigh(s) 125 grams, 250 grams, and 400 grams and selected holding time in range of 30 minutes, 45 minutes, and 60 minutes. In the result, it was obtained 463.550 kg / mm2 for the highest value of toughness with the weight of 400 gr activated carbon and holding time of 30 minutes. Therefore, it indicated that the higher weight of activated carbon in the carburizing process, the material hardness value will be higher as well, with the lowest holding time.



Keywords

pack carburizing; vickers hardness; JIS G-3123; activated carbon; holding time



Full Text: PDF



References


[1] Akita M, Tokaji K. Effect of carburizing on notch fatigue behaviour in AISI 316 austenitic stainless steel. Surface and Coatings Technology. 200(20) : 6073-6078, 2006.

[2] Jiang B. High Toughness and Multiphase Microstructure Transition Product of Carburizing Steel by a Novel Heat Treatment Cooling Process. 675 : 361-370, 2016.

[3] M.M.A. Bepari. 2016. Comprehensive Materials Finishing Volume 2 : Surface and Heat Treatment Processes. Pages 71-106.

[4] Zhang Sheng-guang., Wang Wen-zhong., Zhang Hai-bo., Zhao Zi-qiang. The effect of hardness distribution by carburizing on the elastic-plastic contact performance. Tribology International. 100 : 24-34, 2015.

[5] Suh B-S, Lee W-J. Surface hardening of AISI 316L stainless steel using plasma carburizing. Thin Solid Films. 295 : 185–92, 1997.

[6] CAO Yan-guang, Xu Le, Zhang Gou-qiang, Shi Jie, Wang Mao-qiu. Rolling contact fatigue properties of SAE 8620 steel after case carburizing. Journal of Iron and Steel Research, International. 23(7) : 711-716, 2016.

[7] C.M. Li, Q. He, W.Z. Tang, F.X. Lu. Surface Coating Technology. 187 : 1-5, 2004.

[8] J.M. Baek, Y.R. Cho, D.J. Kim, K.H. Lee. Surface Coating Technology. 131 : 568-573, 2000.

[9] B. Edenhofer, W. Grafen, J.M. Ziller. Surface Coating Technology. 142–144 : 225-234, 2001.

[10] Bashu S A, Singh K, Rawat M S. Effect of heat treatment on mechanical properties and fracture behaviour of a 12CrMoV steel. Materials Science and Engineering : A. 127(1) : 7-15, 1990.

[11] Huang C, Zhang C, Jiang L, et al. Isothermal heat treatment of a bearing steel for improved mechanical properties. Journal of Alloys and Compounds. 660 : 131-135, 2016.

[12] Leskovšek V, Šuštaršič B, Jutriša G. The influence of austenitizing and tempering temperature on the hardness and fracture toughness of hot-worked H11 tool steel. Journal of Materials Processing Technology. 178(1) : 328-334, 2006.

[13] Li J, Zhang C, Jiang B, et al. Effect of large-size M23C6-type carbides on the low-temperature toughness of martensitic heat-resistant steels. Journal of Alloys and Compounds. 685 : 248-257, 2016.

[14] Curry D A, Knott J F. The relationship between fracture toughness and microstructure in the cleavage fracture of mild steel. Metal Science, 2013.


Article View

Abstract views : 253 times | PDF files viewed : 130 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/r.e.m.v2i1.805




Copyright (c) 2017 R.E.M. (Rekayasa Energi Manufaktur) Jurnal

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.