Analisa Hasil Uji Impak Sampah Plastik Jenis PP, PET, dan Campuran (PP + PET)

DOI: https://doi.org/10.21070/r.e.m.v2i1.751

Author (s)


(1) * Wawan Trisnadi Putra   (Program Studi Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Ponorogo)  
        Indonesia
(2)  Ismono Ismono   (Program Studi Teknik Informatika Umpo Ponorogo)
(3)  Fadelan Fadelan   (Program Studi Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Ponorogo)
(4)  Yoyok winardi   (Program Studi Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Ponorogo)
(*) Corresponding Author

Abstract


Material Plastic is difficult to decompose, so it needs to be held research on utilization of plastic waste that is around us.  Impact test on recycled plastic waste aims to find out the physical properties, tenacity, toughness of plastic waste re-rubbish. Specimens of impact test based on standard sample (ASTM E-23) with Charpy test rod has dimension of size is 10 x 10 x 100 mm (height x width x length). With the notch position in the center, with a V note notch,  2 mm notch depth from the surface of the specimen and  45º notch angle. The specimens were made according to the sample with the test carried out 10 times, with the result of the average value of the specimens being the polypropylene type plastic of the mean energy impact value = 1.31 joule and the mean impact strength value = 0.0161 joule / mm². Polyethylene Terephthalate plastics with mean value of impact energy = 1.15 joule and mean impact strength = 0,0138 joule / mm², plastic mixture between PP and PET value of impact energy = 1.18 joule and mean impact strength = 0.0145 joule / mm². The results of this Polypropelin plastic test have the highest impact value value for recycled plastic waste.



Keywords

plastic waste; sectional area; impact energy; impact strength



Full Text: PDF



References


[1] S. S. Surdia, Tata, Pengetahuan Bahan Teknik. Jakarta Indonesia, 1995.

[2] Meriam JL dan Kraig LG, “Mekanika Teknik Edisi Kedua Jilid Satu Versi S1,” 1993.

[3] Y. Herman, “Buku Karakterisasi Material 1 Pengujian Merusak (Destructve Testing),” 2009.

[4] William D. Callister Jr. Jhon Wiley dan Sons, “Material Science and Engineering,” 2007.

[5] M.M.Munir, “Modul Praktek Uji Bahan,” vol. 1.

[6] S. Sherverlana, “Modul Praktikum Material Teknik UNILA,” 2013.

[7] Laboratorium Metalografi dan HST Departemen Metalurgi dan material FTUI. Callister, “Modul Praktikum Destructive,” 2007.


Article View

Abstract views : 398 times | PDF files viewed : 576 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/r.e.m.v2i1.751




Copyright (c) 2017 Rekayasa Energi Manufaktur

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.