Pengaruh Flux Elektroda AWS 5.1 E 6013 Dicelup Oli pada Pengelasan Besi Cor Kelabu FC-25 Terhadap Kekuatan Tarik

DOI: https://doi.org/10.21070/r.e.m.v3i2.1857

Author (s)


(1)  Aris Hermanto   (Teknik Mesin, Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(2) * Iswanto Iswanto   (Teknik Mesin, Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(*) Corresponding Author

Abstract


In this study using specimens of gray cast iron Fc-25 (grade 2500). The test specimen is needed there 12 specimens include three test specimen material (base metal), 3 specimen variety of welding electrodes cast CI-A1, 3 specimen variety of welding using welding electrodes AWS 5.1 E6013 without immersion oil, three specimens variation welding using welding electrodes 5.1 AWS E6013 with immersion oil. The results of testing specimens welding electrodes cast CI-A1 in the amount of 16.63 MPa with 0.84% strain and a variety of welding electrode AWS E6013 5.1 with immersion oil also has the highest ultimate tensile strength of welding another variation in the amount of 17.98 MPa with a strain of 0.48% , While the lowest was tensile strength using a variety of welding electrode AWS E6013 5.1 without immersion oil that is 16.28 MPa with a strain of 0.49%.



Keywords

Grey Cast Iron FC-25; Welding Electrodes; Tensile Strength



Full Text: PDF



References


[1] Mulyadi, dkk., “Rekayasa Elektroda Mild Steel (LB-52) dicelup Olie Sebagai Pengganti Alternatif Elektroda Besi Cor (CIA-1) Pada Pengelasan Besi Cor Kelabu Fc-30 Di Lihat Dari Segi Kekuatan Tarik Hasil Pengelasan,” Prosiding SNFT, Vol 5. Hal: 52-61, 2015.

[2] Khusnul Yaqin, Muhammad dkk, “Pengaruh Preheat Dan Postheat Terhadap Lebar Haz, Strukturmikro, Dan Distribusi Kekerasan Pada Proses Pengelasan Smaw Besi Cor Kelabu Fc 25, Jurnal Teknik Material Dan Metalurgi, Institut Teknologi Sepuluh Nopember Surabaya, 2011.

[3] Callister, William D, Materials Science and Engineering, John Willey &Sons, Inc. USA., 2011.

[4] Wiryosumarto, Harsono dan Okumura, Toshie, Teknologi Pengelasan Logam, Edisi Cet. Ke-8, PT Pradnya Paramita, Jakarta, 2000.

[5] Widharto, Sri, Petunjuk Kerja Las, Edisi Cet. Ke-5, PT Pradnya Paramita, Jakarta, 2003.


Article View

Abstract views : 54 times | PDF files viewed : 43 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/r.e.m.v3i2.1857




Copyright (c) 2018 R.E.M. (Rekayasa Energi Manufaktur) Jurnal

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.