Kajian Numerik Ketebalan Lapisan Redaman Getaran Berbahan Semen untuk Dek Kapal Penumpang

DOI: https://doi.org/10.21070/r.e.m.v1i1.172

Author (s)


(1) * Wibowo H. Nugroho   (Pusat Teknologi Rekayasa Industri Maritim, BPPT, Kompleks ITS Sukolilo, Surabaya)  
        Indonesia
(2)  Nanang J. H. Purnomo   (Pusat Teknologi Rekayasa Industri Maritim, BPPT, Kompleks ITS Sukolilo, Surabaya)  
        Indonesia
(3)  Endah Suwarni   (Balai Teknologi Hidrodinamika, BPPT, Kompleks ITS Sukolilo, Surabaya)  
        Indonesia
(*) Corresponding Author

Abstract


Ship vibration problems today's increasingly complex and often occurs in addition to the strict requirements of ship classification agencies for allowable levels of vibration so that passengers and crew more comfortable and secure. One method for reducing the influence of ship structural vibration is to minimize the response of the vibration by using damper. This paper describes the effect of the thickness of the damping layer made from cement material on the deck plate due to the harmonic load excitation. As cement is a common damper application on the ship deck.  A numerical modeling based on finite element analysis was applied in two-layer conditions, namely an overall and tiling coating. The results of this study indicate that thee minimum thickness of the cement layer has an optimum damping for the overall coating is approximately 8 mm and as for tile coating is approximately 15 mm.



Keywords

ship vibration; harmonic response; vibration damper.



Full Text: PDF



References


[1] Adams, V. and Askenazi, A. (1999). Building Better Products with Finite Element Analysis, On Word Press, Santa Fe, N. M .,

[2] American Bureau of Shipping, (2006), Guidance Notes On Ship Vibration.

[3] Biro Klasifikasi Indonesia. (2009). Rules For The Classification And Construction Of Seagoing Steel Ships, Volume I Rules For Hull Edition.

[4] Meriem, J.L. and Kraige, L.G. (1987). Vibration and Time Response, Engineering Mechanics Vol 2, Dynamics, Chap 8

[5] Nugroho, W. H. dan Pitoyo. (2012). Penentuan Koefisien Redaman Getaran Bahan Pelapis Plat Dek Kapal, Wave, Jurnal Ilmiah Teknologi Maritim, Volume 6, No 2, Desember

[6] Nugroho, W. H. And Tjahyanti, P. H. (2009). A detection of the Development of Cracks in a Metallic Structure Using R – Curve Method, ( A Comparison with the Shifting Frequency Method) Jurnal Teknik Mesin , ITS Vol.8 Nomor – 3,

[7] Purnomo, N. J. dan Nugroho, W. H. (2013). Kajian Numerik Bahan Redaman Alternatif untuk Mengurangi Getaran pada Dek Kapal Penumpang, Wave, Jurnal Ilmiah Teknologi Maritim, Volume 7, No 1, Juni.

[8] Vorus, W.S. and Paulling, J. R. as editor (2010). Vibration, The Principles of Naval Architecture Series, The Society of Naval Architects and Marine Engineers (SNAME).


Article View

Abstract views : 297 times | PDF files viewed : 291 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/r.e.m.v1i1.172




Copyright (c) 2016 Rekayasa Energi Manufaktur

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.