Analisis Sifat Mekanik Material Komposit Ecenggondok Berbahan Filler Ampas Singkong Dengan Matrik Polyester

DOI: https://doi.org/10.21070/r.e.m.v1i1.170

Author (s)


(1) * Karyanik Karyanik   (Jurusan Teknik Mesin, Staf Pengajar, Universitas Muhammadiyah Sidoarjo, Sidoarjo, Indonesia)  
        Indonesia
(2)  Nasmi Herlina Sari   (Jurusan Teknik Mesin, Staf pengajar,Universitas Mataram, Mataram, Indonesia)  
        Indonesia
(*) Corresponding Author

Abstract


The using of composits material currently more developed together with the using of it from the simpler like larges of housing tools to industry sector.The composite resech supported by fiber of eichhornia crassipes solms that has filler of cassava waste that has functions to know tensile strength and impact strength.This reseach used the various added of cassava waste , 0, 20, 25, and 30 (% of weight) and using of polyester resin matrix, the form of the composite speciment is plat with the fractions volume eichhornia crassipes solms fiber 20 % (constant), the fiber length 25 mm, because methode to found eichhornia crassipes solms fiber using methode of manual so that nothing of fibers have cuality and length with the same.Composite manufacturing process carried out by the methode of hand lay up with emphasis manually using glass as a mold and pressure.The results tensile reseach founded that lests of filler as used so that the higest that tensile strength, the highest tensile strength at variations added of cassava waste 0 %  ( 9,311 N/mm2 ) and for impact strength the biggest added of cassava waste so that the highest energy to fight  of materials , the high tensile strength found in the variations added of cassava waste 25 % ( 0,018282 J/mm2 ).


Keywords

Eichornia crassipes solms fiber; cassava waste; tensile strength; impact strength.



Full Text: PDF



References


[1] Anonim, 2005, Mengekspor Sampah, Kenapa Tidak?, Harian Suara Pembaruan, edisi 22

[2] ASTM, 1990, Standards and Literature References for Composite Materials, 2d ed.,American Society for Testing and Materials, Philadelphia, PA.

[3] Budinski, Kenneth, 2000, Engineering Materials Properties and Selection sixth Edition, Prentice Hall, New Jersey.

[4] Crawford R.J.1998, Plastics Enginering 3ed ,Johannesburg.

[5] Dr.Evelin Jähne, 2008, Chemie und Technologie der Faserstoffe, Vorlesung Winter Semester. TU Dresden.

[6] Gibson.Ronald F., 1994, Principles Of Composite Material Mechanics, Mc Graw Hill Inc, New York.

[7] Jamasri, 2002, Buku Pegangan Kuliah Komposit, Surakarta

[8] Jones, M. R.,1975, Mechanics of Composite Materials, Mc Graw Hill Kogakusha, Ltd.

[9] Pramuko I Purboputro,2007, Pengaruh Panjang Serat terhadap Kekuatan Impact Enceng Gondok dengan Matrik Poliester

[10] Roseno, Seto, 2003, Karakteristik dan Model Mekanis Material Komposit Berpenguat Serat Alam, BPPT , Jakarta.

[11] Shackelford James F, 1996, Introduction To Materials Science For Engineers, Prentice Hall International. Inc, London.

[12] Staf Laboratorium Bahan Teknik, 2005., Petunjuk Praktikum Ilmu Logam,Teknik Mesin UGM, Yogyakarta.

[13] Surdia T., Saito S, 1991, Pengetahuan Bahan Teknik, Pradnya Paramita, Jakarta.

[14] Widayat,dkk,1975, Serat-serat Tekstil, Institut Teknologi Tekstil, Bandung,


Article View

Abstract views : 319 times | PDF files viewed : 205 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/r.e.m.v1i1.170




Copyright (c) 2016 Rekayasa Energi Manufaktur

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.