Pengaruh Daya Motor Bensin Terhadap Kapasitas Produksi Mesin Pemipil Jagung

DOI: https://doi.org/10.21070/r.e.m.v3i2.1681

Author (s)


(1) * Nasmi Herlina Sari   (Teknik Mesin, Fakultas Teknik, Universitas Mataram)  
        Indonesia
(2)  Nurhasanah Nurhasanah   (Teknik Mesin, Fakultas Teknik, Universitas Mataram)  
        Indonesia
(*) Corresponding Author

Abstract


The demand for corn kernels is increasing in developing countries. This study focuses to investigated the effect of power engine on the production capacity of corn sheller machine. The power of engine has been varied i.e 4 HP, 5,5 HP and  8 HP. The methods of this research using by empirisly calculated. The results shows that the maximum production capacity obtained on power engine at 8 HP, 5,5 HP and 4 HP are 14 kg/minutes, 10 kg/min, and 7 kg/min, respectively. The conclusion of this research is the production capacity of corn sheller machine affected by power engine, shaft diameter, pegs length, bearing number and spin sheller.


Keywords

Corn Sheller Machine; Power Engine; Production Capacity; Shaft Diameter; Torque



Full Text: PDF



References


. N. H. Sari, E. D. Sulistyowati, W. Dirjan, "Analisis Sifat Kekuatan Impact Komposit Sandwich Plastik Bekas Diperkuat Serat Sisal dengan Core Bonggol Jagung," Dinamika Teknik Mesin, (4), 38-43, 2014.

[2]. N. H. Sari, I. N. G. Wardana, Y. S. Irawan, E. Siswanto, "Physical and Acoustical Properties of Corn Husk Fiber Panels," Advances in Acoustics and Vibration, vol. 2016, Article ID 5971814, 8 pages. 2016.

[3]. N. H. Sari, I. N. G. Wardana, Y. S. Irawan, E. Siswanto, “Characterization of the Chemical, Physical, and Mechanical Properties of NaOH–treated Natural Cellulosic Fibers from Corn Husks,” Journal of Natural Fibers, 15(4): 545 –558, 2018. doi: 10.1080/15440478.2017.1349707.

[4]. M. Aqil, dan Z. Bunyamin, "Sistem Produksi di Provensi Nusa Tenggara Barat, Jurnal Balai Penelitian Tanaman Serealia," tersedia: http://balitsereal.litbang.pertanian.go.id/wp-content/uploads/2018/01/bt18.pdf, diakses selasa 13 Juli 2018.

[5]. N. H. Sari, I. N. G. Wardana, Y. S. Irawan, E. Siswanto, "Corn Husk Fiber–Polyester Composites as Sound Absorber: Nonacoustical and Acoustical Properties," Advances in Acoustics and Vibration, Volume 2017, 2017. https://doi.org/10.1155/2017/4319389

[6]. A. Hasan, A. Nurhidayat, R. Yari, "Perancangan Mesin Pemipil Jagung," Universitas Sebelas Maret, Surakarta, 2014.

[7]. M. A. A. Aziz, dan Yunus, "Rancang Bangun Mesin Pemipil Jagung Skala UKM," JRM, (02), 5-9, 2015.

[8]. K. Suga, dan Sularso, "Dasar Perencanaan dan Pemilihan Elemen Mesin,"PT Pradnya Paramita, Jakarta, 2013.

[9]. Fitrinaldi D, "Rancang Bangun Mesin Pemipil Jagung dengan kapasitas 100 Kg/jam," Tugas Akhir, Jurusan Teknik Mesin Politeknik Negeri Padang. 2017.


Article View

Abstract views : 52 times | PDF files viewed : 43 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/r.e.m.v3i2.1681




Copyright (c) 2018 R.E.M. (Rekayasa Energi Manufaktur) Jurnal

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.