Penentuan Faktor – Faktor Berpengaruh Terhadap Kualitas Kuat Tekan Bata Ringan Dengan Metode Statistical Process Control (SPC) Dan Metode Taguchi


Author (s)

(1) * Bayu Arif Wicaksono   (Universitas Muhammadiyah Sidoarjo)  
(2)  Wiwik Sulistiyowati   (Universitas Muhammadiyah Sidoarjo)  
(*) Corresponding Author


PT.Viccon Modren Industries is a company engaged in the brick industry light . Problems often arise during the process of making light brick is a lightweight brick compressive strength is not in accordance with company standards for ˃3,50 N / mm² , so the quality is not optimal light brick .

             In an effort to overcome these problems , it is necessary to control the production of Online Quality Control with Statistical Process Control methods to identify the root of the problems that occur in the production of lightweight brick . Statistical tools in Statistical Process Control methods include check sheets , Pareto charts , cause-effect diagrams , and maps control p . Then the data Statistical Process Control is integrated with the Taguchi method as Offline Quality Control to be used as a parameter in determining the factors that have significant influence in the optimization of compressive strength of lightweight brick.

             Based on the research showed that the factors significantly influence the light brick compressive strength is the amount of cement and gypsum number . Combination level of the factors that resulted in the average value and variance of compressive strength of lightweight brick that is optimal is the same , namely the setting factor water volume at level 2 for 150 Liter ( A2 ) , factor the amount of silica sand on level 2 of 550 Kg ( B2 ), cement jumalah factor on level 3 of 350 Kg ( C3 ) , as well as gypsum julah factor on level 3 of 300 Kg ( D3 ).


Keywords : compressive strength , Statistical Process Control , Taguchi Methods.


compressive strength , Statistical Process Control , Taguchi Methods.

Full Text: PDF


[1]. Prawirosentono., S., (2007)., Filosofi Baru Tentang Manajemen Mutu Terpadu Abad 21., PT. Bumi Aksara , Jakarta.

[2]. Saraswati, R., dkk. (2011)., Perancangan Group Technology Layout di PT. DPS Surabaya dengan Metode Simulasi dan Metode Taguchi., Jurnal Teknik Industri Universitas W.R. Supratman Surabaya, Vol.2, No.2,

[3]. Susetya, J., dkk., (2009)., Analisis Pengendalian Kualitas Melalui Evaluasi dan Perbaikan Proses Produksi dengan Pendekatan Metode Control Chart dan Metode Taguchi., Jurnal Teknologi Technoscientia., Vol.1., No.2..

[4]. Heizer, J., Render., B., (2009)., Manajemen Operasi., Salemba Epat, Jakarta.

Article View

Abstract views : 751 times | PDF files viewed : 647 times

Dimensions, PlumX, and Google Scholar Metrics



  • There are currently no refbacks.

Copyright (c) 2017 PROZIMA (Productivity, Optimization and Manufacturing System Engineering)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.