Analisis Kualitas Produk Dengan Menggunakan Metode FMEA dan Fault Tree Analisys (FTA) Di Exotic UKM Intako

DOI: https://doi.org/10.21070/prozima.v2i2.2200

Author (s)


(1) * Nuzul Ardiansyah   (Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(2)  Hana Catur Wahyuni   (Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(*) Corresponding Author

Abstract


Small and medium business of industrial bags and suitcases intako located in tanggulangin sidoarjo is a center producing varrious products such as bags, suitcases, and jacket in exotic store. Along with the increasing amount of production it must be coupled with the improvement of quality in order to be able to meet customer satisfaction. But in production activities often experience some obtacles one of them is product defect caused by human error and engine factor. This study uses the method Failure Mode and Effect Analysys (FMEA)  to identify each stage of the process and the method Failure Tree Analisys (FTA) to find the root couse of failure . there are 6 potential failures ot the 4 production process of making bags with the highest RPN value such as sewing machine often having trouble with the value of RPN 504 and there are 12 basic event of FTA tree error depiction affecting product quality in exotic UKM intako.



Keywords

Failure Mode and Effect Analysys (FMEA), Failure Tree Analisys (FTA), Product Defect, Product Quality.



Full Text: PDF



References


Irawan, July Prasetyo. Santoso, Imam. Dan Mustaniroh, Siti Asmaul (2017), Model Analisis dan Strategi Mitigasi Risiko Produksi Keripik Tempe, Jurnal Teknologi dan Manajemen Agroindustri Vol. 6, No. 2, hal 88 – 96, Malang.

Risqa, Attaya. Adianto, Hari. Dan Liansari, Gita permata. (2016), Usulan Pengendalian Kualitas Produk Stang Engkol di Produsen Senjata Menggunakan Metode Failure Mode Effect Analysis (FMEA) dan Fault Tree Analysis (FTA), Jurnal Teknik Industri, Vol. 4, No. 02, hal 36 – 47, Bandung.

Fauzi, Ahmad Yudi. Dan Aulawi, Hilmi (2016), Analisis Pengendalian Kualitas Produk Peci Jenis Overset Yang Cacat di PD PANDUAN ILLAHI Dengan Menggunakan Metode Fault Tree Analysis (FTA) dan Metode Failure Mode And Effect Analysis (FMEA), Jurnal Kalibrasi Vol. 14, No.1, Garut

Idris, Iswandi. Sari, Ruri Aditya. Dan Wulandari (2016), Pengendalian Kualitas TempeDengan Metode Seven Tools, Jurnal Teknovasi, Vol. 03, No. 1, hal 66 – 80, Medan.

Mayangsari, Diana Fitria. Adianto, Hari. Dan Yuniati, Yoanita (2015), Usulan pengendalian kualitas produk isolator dengan metode failure mode and effect analysis (FMEA) dan fault tree analysis (FTA). Jurnal Teknik Industri Itenas Vol. 03, No. 2, hal 81 – 91, Bandung.


Article View

Abstract views : 410 times | PDF files viewed : 328 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/prozima.v2i2.2200


Refbacks

  • There are currently no refbacks.




Copyright (c) 2018 PROZIMA (Productivity, Optimization and Manufacturing System)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.