Pengendalian Kualitas Produk Dengan Menggunakan Metode SQC dan HRA Guna Meningkatkan Hasil Produksi Tahu di IKM H. Musauwimin

DOI: https://doi.org/10.21070/prozima.v2i1.1065

Author (s)


(1) * Koyor Rujianto   (Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(2)  Hana Catur Wahyuni   (Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Sidoarjo)  
        Indonesia
(*) Corresponding Author

Abstract


Small and Medium Industries (IKM) H.Musauwimin is a manufacturing industry in the field of tofu production. In the production process there are still frequent product defects, including coarse tofu, tofu surface torn, soft texture, and faded color. For this reason, we need a way to minimize the possibility of product defects. The objectives of this study are (1) Identifying disability factors using the Statistical Quality Control (SQC) method, (2) Improving employee performance performance using the Human Reliability Assessment (HRA) method, (3) Minimizing product defects in the production process so as to increase productivity. The results of this study are (1) of the four types of rejects for the biggest 3 months in tearing surface type with a percentage of 46% of all rejects (2) By testing the adequacy of the data using the SQC method in the production process for 3 months then sample we tested a total of 284. From the results of the data adequacy test data obtained a value of 7,289, so the number of samples is larger than the sample that should be. (3) From the results of measuring employee performance using the HRA method. The biggest HEP value is the type of Possible Error. The operator only estimates and there is no standard in mixing vinegar acid with the filtrate. With an HEP value of 0.48. So this factor is the most dominant cause of disability and must be corrected immediately.



Keywords

Statistik Quality Control (SQC), Human Reliability Assessment (HRA)



Full Text: PDF



References


Awaliyah, M., Novitasari, M., & Martha, S. (2016). Analisis Produksi Kayu Lapis Menggunakan Metode Statistic Quality Control (SQC). Buletin Ilmiah dan Terapan (Bimaster), 5(1), 18.

Bachtiar, S. T., & Asysyfa Hasni, R. (2013). Analisa Pengendalian Kualitas dengan Menggunakan Statistic Quality Control (SQC). Jurnal Teknik Industri, 29-36.

Mardi Dian, S., Astriyanty, A. R., & Rizani, N. (2015). Human Reliability Assessment dengan Metode Human Error Assesment and Production Tecniqua pada Operator Stasiun PT.X. Jurnal Rekayasa Sistem Industri, 4(1).


Article View

Abstract views : 663 times | PDF files viewed : 286 times

Dimensions, PlumX, and Google Scholar Metrics

10.21070/prozima.v2i1.1065


Refbacks

  • There are currently no refbacks.




Copyright (c) 2018 PROZIMA (Productivity, Optimization and Manufacturing System Engineering)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.